mst
HOME  |  COMPANY  |  NEWS  |  CAREERS  |  CONTACT  |  PRODUCTS  |  APPLICATION  

Press Releases

Technical News

Hall effect sensor ICs
1 coil
2 coil
Dual Channel Switch
Latch
Omni Polar Switch
Programable linear
Ratiomatic Linear
Uni Polar Switch


 

 

Technical News

  HOME > News > Technical News
 
Quantum Dots Deep Into Hybrid LEDs

 

PARIS°™Boasting record-breaking color conversion effective quantum yields, an international team of researchers has designed a novel photonic quasi-crystal LED structure that deeply embeds quantum dots within the whole stack of the LED|s active layers.

The researchers first grew a LED stack of GaN/InGaN Multi-Quantum Well (MQW) onto a sapphire substrate, and then used nano-imprint lithography and plasma etching to "punch" the whole stack and structure it as a 12-fold symmetric quasi-crystal (PQC).

Forming an array of 480nm radius cylindrical holes with a lattice pitch of 750nm, the PQC structure was etched deep enough to penetrate through the whole MQW active area, then filled with a blend of quantum dots (QDs) deposited through a spin coating process.

In their Optica paper "Hybrid photonic crystal light-emitting diode renders 123% color conversion effective quantum yield", the researchers see this hybridization and the specific quasi-crystal geometry they chose as key factors.

When used for LED colour conversion, colloidal quantum dots (QDs) are usually dispersed into an encapsulation layer above the active LED structure, missing out the majority of the light emitted by the LED (60% to 80% of which remaining trapped within the epitaxy layers due to total internal reflection).

With this hybrid architecture, the QD emitters are placed in close proximity to the multiple quantum wells (MQWs) of the active area. This, the authors write, improves the out-coupling efficiency between MQWs and QDs, simultaneously allowing for a non-radiative resonant energy transfer between the MQWs and the QDs and near-field radiative coupling of trapped (guided) modes in the LED to the emitters.

What|s more, due to its highly symmetrical far-field beam shape, the 12-fold symmetric photonic quasi-crystal exhibits long-range order and short-range disorder and possesses semi-random properties, further increasing light extraction compared to traditional photonic crystals.

The researchers report effective quantum yields for the QD emitters reaching 123% for single QD species colour converters, and around 110% for a white blend of three commercially available QDs (emitting at 535, 585 and 630nm) achieving a quasi-perfect 6,500 K D65 spectrum. They think these performances could be further improved by using state-of-the-art nanocrystalline emitters.

This research involved the School of Electronics and Computer Science and the School of Physics and Astronomy at the University of Southampton (UK), Luxtaltek Corporation (Taiwan), the Department of Photonics & Institute of Electro-Optical Engineering, National Chiao Tung University (Taiwan) and the Center for Photonics and Quantum Materials, Skolkovo Institute of Science and Technology (Russia).

°™Julien Happich is editor in chief of for EE Times Europe

Artical originnally published on EE Times Europe.


Focus on Hall Effect Technology, and get into Consumer/Industrial/ Automation/Automotive field not only IC but also Sensor module applications. Visitor:1429947 times